#!/bin/bash
# Setup local NVMe storage for K3s node
# Runs at boot via systemd service
#
# Logic:
# - No NVMe: exit cleanly
# - No partition table: auto-format (new drive)
# - Has our labels: mount and exit (already configured)
# - Has other partitions: prompt with 120s timeout (safety)

set -euo pipefail

DEVICE="/dev/nvme0n1"
CONTAINERD_SIZE="75GiB"
CONTAINERD_LABEL="containerd"
LONGHORN_LABEL="longhorn"
CONTAINERD_MOUNT="/var/lib/containerd"
LONGHORN_MOUNT="/var/lib/longhorn"
MARKER_FILE=".netboot-storage"
PROMPT_TIMEOUT=120

# Colors for console output
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
CYAN='\033[0;36m'
NC='\033[0m'

# Log to both console and journald
log()   { echo -e "${GREEN}[storage]${NC} $*"; logger -t setup-node-storage "$*"; }
warn()  { echo -e "${YELLOW}[storage]${NC} $*"; logger -t setup-node-storage -p warning "$*"; }
error() { echo -e "${RED}[storage]${NC} $*"; logger -t setup-node-storage -p err "$*"; }

# Check if NVMe exists
if [ ! -b "$DEVICE" ]; then
    log "No NVMe device found at $DEVICE - skipping storage setup"
    exit 0
fi

DEVICE_SIZE=$(lsblk -b -d -n -o SIZE "$DEVICE" | awk '{printf "%.0fGB", $1/1000000000}')
log "Found NVMe: $DEVICE ($DEVICE_SIZE)"

# Get partition names (handles nvme naming with 'p' prefix)
if [[ "$DEVICE" == *"nvme"* ]]; then
    PART1="${DEVICE}p1"
    PART2="${DEVICE}p2"
else
    PART1="${DEVICE}1"
    PART2="${DEVICE}2"
fi

# Function to mount existing storage
mount_storage() {
    log "Mounting existing storage..."
    
    mkdir -p "$CONTAINERD_MOUNT" "$LONGHORN_MOUNT"
    
    if ! mountpoint -q "$CONTAINERD_MOUNT"; then
        mount -L "$CONTAINERD_LABEL" "$CONTAINERD_MOUNT" || {
            error "Failed to mount containerd partition"
            return 1
        }
    fi
    
    if ! mountpoint -q "$LONGHORN_MOUNT"; then
        mount -L "$LONGHORN_LABEL" "$LONGHORN_MOUNT" || {
            error "Failed to mount longhorn partition"
            return 1
        }
    fi
    
    log "Storage mounted:"
    log "  $CONTAINERD_MOUNT: $(df -h "$CONTAINERD_MOUNT" | tail -1 | awk '{print $2}')"
    log "  $LONGHORN_MOUNT: $(df -h "$LONGHORN_MOUNT" | tail -1 | awk '{print $2}')"
    return 0
}

# Function to format the drive
format_storage() {
    log "Partitioning $DEVICE..."
    
    wipefs -af "$DEVICE"
    parted -s "$DEVICE" mklabel gpt
    parted -s "$DEVICE" mkpart primary ext4 1MiB "$CONTAINERD_SIZE"
    parted -s "$DEVICE" mkpart primary ext4 "$CONTAINERD_SIZE" 100%
    
    # Tell kernel to re-read partition table and wait for udev
    partprobe "$DEVICE"
    udevadm settle --timeout=10
    
    # Verify partitions appeared
    if [ ! -b "$PART1" ] || [ ! -b "$PART2" ]; then
        error "Partitions not found after partprobe: $PART1, $PART2"
        exit 1
    fi
    
    log "Formatting ${PART1} as ext4 (containerd, 75GB)..."
    mkfs.ext4 -L "$CONTAINERD_LABEL" -q "$PART1"
    
    log "Formatting ${PART2} as ext4 (longhorn, remaining)..."
    mkfs.ext4 -L "$LONGHORN_LABEL" -q "$PART2"
    
    # Mount the new partitions
    mkdir -p "$CONTAINERD_MOUNT" "$LONGHORN_MOUNT"
    mount "$PART1" "$CONTAINERD_MOUNT"
    mount "$PART2" "$LONGHORN_MOUNT"
    
    # Create marker files with metadata
    for mount_point in "$CONTAINERD_MOUNT" "$LONGHORN_MOUNT"; do
        cat > "${mount_point}/${MARKER_FILE}" <<EOF
# Netboot storage marker - DO NOT DELETE
formatted_date=$(date -Iseconds)
formatted_by=setup-node-storage
hostname=$(hostname)
device=$DEVICE
EOF
    done
    
    log "Storage formatted and mounted successfully"
    log "  $CONTAINERD_MOUNT: $(df -h "$CONTAINERD_MOUNT" | tail -1 | awk '{print $2}')"
    log "  $LONGHORN_MOUNT: $(df -h "$LONGHORN_MOUNT" | tail -1 | awk '{print $2}')"
}

# Check for partition table
# Method 1: blkid returns empty PTTYPE for unpartitioned drives
# Method 2: parted error message (locale-dependent fallback)
has_partition_table() {
    local pttype
    pttype=$(blkid -o value -s PTTYPE "$DEVICE" 2>/dev/null)
    if [ -n "$pttype" ]; then
        return 0  # has partition table
    fi
    # Fallback: check if parted can read it
    if parted -s "$DEVICE" print &>/dev/null; then
        return 0  # has partition table
    fi
    return 1  # no partition table
}

if ! has_partition_table; then
    # No partition table - this is a fresh drive, auto-format
    log "Empty drive detected (no partition table) - auto-formatting..."
    format_storage
    exit 0
fi

# Has partition table - check if it's ours
if blkid -L "$CONTAINERD_LABEL" &>/dev/null && blkid -L "$LONGHORN_LABEL" &>/dev/null; then
    # Check for marker file (belt and suspenders)
    # Create temp mount to check marker without leaving dangling mount
    TEMP_MOUNT=$(mktemp -d)
    if mount -L "$CONTAINERD_LABEL" "$TEMP_MOUNT" 2>/dev/null; then
        if [ -f "${TEMP_MOUNT}/${MARKER_FILE}" ]; then
            umount "$TEMP_MOUNT"
            rmdir "$TEMP_MOUNT"
            log "Storage already configured (found labels and marker)"
            mount_storage
            exit 0
        else
            umount "$TEMP_MOUNT"
            rmdir "$TEMP_MOUNT"
            # Has our labels but no marker - probably ours, mount it
            warn "Found labels but no marker file - assuming configured"
            mount_storage
            exit 0
        fi
    fi
    rmdir "$TEMP_MOUNT" 2>/dev/null || true
fi

# Has partitions but not ours - this could contain data!
warn "NVMe has existing partitions but no netboot labels."
warn "This drive may contain important data!"
echo ""
lsblk "$DEVICE"
echo ""

# Prompt on console with timeout
echo -e "${CYAN}========================================${NC}"
echo -e "${CYAN}  Press ENTER within ${PROMPT_TIMEOUT}s to format  ${NC}"
echo -e "${CYAN}  Or wait to skip (safe default)        ${NC}"
echo -e "${CYAN}========================================${NC}"
echo ""

if read -t "$PROMPT_TIMEOUT" -p "Format $DEVICE? [press ENTER to confirm] " response; then
    echo ""
    warn "Formatting in 5 seconds... Ctrl+C to abort"
    sleep 5
    format_storage
else
    echo ""
    warn "Timeout - skipping storage setup (drive left untouched)"
    warn "To format manually, reboot and press ENTER when prompted"
    exit 0
fi